Led Strip Controller DC12-24V 3A/3CH 2.4GHz RF wireless RGB strip controller
Mini series LED controller reflected LTECH 12 years' powerful independent R&D ability in LED field, Its volume
is only 1/3 of the vonventional controller, but can implement features such as dimming, RGB and color temperature control. Its high cost performacne and creative design, allowing users to enjoy the benefits and convenience.
Parameter:
Remote:
- Model:M3/M6/M7
- Working Voltage:3V DC(battery CR2032)
- Working Frequency:433.92MHz
- Remote Distance:30m
- Working Temp:-30℃-55℃
- Dimensions:L104×W58×H9(mm)
- Weight(N.W):42g
Receiver:
- Model:M3-3A
- Input Voltage:12-24V DC
- Max Current Load:Max 3A×3CH
- Max Output Power: 108W(12V)/216W(24V)
- Working Temp:-30℃-55℃
- Dimensions:L135×W30×H20(mm)
- weight(N.W):47g
Total weight(G.W.): 135g
| Working voltage |
DC3V(Battery CR2032 ) |
| Working Frequency |
433.92 MHz |
| Remote Distance |
40-50m |
| Working Temp. |
-30℃~55℃ |
| Dimensions |
L104×W60×H9mm |
| Weight (N.W.) |
42g |
Feature:
A. RF remote is fashionable, slim, light and easy to carry while receiver is small, exquisite and easy to install.
B. RF remote with low power consumption, long distance, strong obstructions penetrating ability, independent ID
interference - free and other properties.
C, 4093/road grey scale (most of them is 256 in the market), high grayscale performance is more outstanding, the light is more gentle, dynamic changing modes become more rich and colorful.
D. One receiver compatible with six different functions of the remote, that is use one receiver can experience
dimming, color temperature and RGB control.
E. RF remote is simple and intuitive to use, a variety of actions at a glance, what you see is what you get,
F Automatic sleep mode, when the touch remote unattended operation over 30s, it can automatically enter
standby mode to exten battery life.
The Learning ID Method of Remote Control:
Remote control has been matched to the receiver before leave factory, if deleted accidentally, you
can learn ID as follow.
Learning ID: Short press ID learning button on the M4-5A receiver, the running light is on, then
press any key on the M2 remote control, the running light flashes several times,
activated.
Cancel ID: Long press ID learning button on the M4-5A receiver for 5 seconds.
Attn: one receiver can be matched with max 10 same or different kinds remote.
Product Tags:
|
|
3A/3CH 2.4GHz Rf Rgb Led Controller , Wifi Led Rgb Strip Controller Rgb And Single Color Images
|
